Resilient protection curtain
EI 60 EI 90 EI 120
9 mm - 6 kg/m2 EI60 / EW120
18 mm - 9 kg/m2 EI90 / EW120, EI120 / EW120
250 x 275 (EI60), 325 x 350 (EI120)
Designed per custom specifications
Extremely light structure
Quick and easy installation
the simple winding shaft ‘Slide & Lock’ system helps reduce the installation time by 25%
Flush shaft
box finish – the EI60-rated version’s shaft box is installed flush with the guide rails
Concealed curtain sheet
the sheet is fully inside of the shaft box when opened
The Marc-Ok fire protection curtain comprises the following components: the curtain sheet, the guide rails, the winding shaft, the shaft brackets, and a VIC drive unit. The curtain sheet is made of three of five layers of multi-ply textile in the EI60 or EI120 rated version, respectively. The primary component of the sheet’s multi-ply structure is steel-wire reinforced glass fibre. The top edge of the curtain sheet is attached to the winding shaft. Along the bottom edge of the curtain sheet is the ballast, which keeps the sheet properly taut (which removes creasing and provides proper winding on the shaft) and provides additional bracing. The winding shaft is installed on brackets attached to the partition. The winding shaft and the brackets are installed inside of the shaft box. The shaft box fascia is made from 0.7 - 1.0 mm galvanized steel sheet. The vertical edges of the curtain sheet carry running shoes which move inside of the guide rail profiles. The cross-sectional size of the guide rail.
The cross-sectional size of the guide rail is 80 x 120 mm. The guide rail fascia is made from 0.7 mm galvanized steel sheet. The guide rail and shaft box fascias are available in galvanized sheets coated in four basic colours, RAL 7016, 7035, 9002 and 9010. A custom colour or a stainless steel sheet version can be ordered. A smoke-control version is available on request. The product can be provided with a wide range of electrical accessories, like fire alarm systems, door position monitoring or access control solutions. Instead of an electrical drive motor and sensors wired to the on-site fire alarm system, smaller product versions can be provided with a thermal fusible trip and a safety retarder which uses a torsion spring to slow down the unwinding of the curtain sheet and prevent injury.
The Marc-Ok resilient fire protection curtains are intended for regulatory-compliant separation of fire zones inside and outside of buildings and across handling system flows.
Thanks to the low header installation height required, the curtain is perfect for installation at construction partitions, particularly in underground garage rooms and indoor shopping malls, where every square centimetre of usable floor area matters and the product dimensions must be minimised. For outdoor installations, the product can be installed on offset brackets to cancel cold bridges.
Marc-Ok are resilient fire zone closures and given their very high fire resistance rating, they can be a successful alternative to passive fire protection solutions which require a larger installation space. They can be installed in tandem with non-fire-rated doors or roller shutters.
For powered protection curtains, the curtain sheet is wound on the shaft and held open either by a brake or the self-arresting drive transmission. When a fire alarm is detected at the control inputs, the sheet is released and unwinds into the closed position.
The Marc-Ok fire protection curtains up to 2.5 m wide and high do not require an electric drive unit. These products are released to close with a thermal fusible trip, which breaks when exposed to approximately 74 °C, and the curtain sheet unwinds to close the fire zone. The torsion spring installed in the shaft ensures a constant closing speed and provides an easy opening action without any additional drive operators, like cranks. The product is available in larger dimensions and with enhanced technical parameters on individual request.
„The information in the contents of this website are not legally binding and the range of products and services is indicative only and shall not be construed as a commercial offer under Article 66 § 1 of the Polish Civil Code.”
Need help?
Our experts will help you select the best solution for your project
Our representative will contact you shortly.
